Auto Start Stop Delete/ Disable from ECU
🚩What You Will Read in This Article:
- What is START/STOP system?
- How does START/STOP system function?
- What is the reason for eliminating START/STOP system?
- What are Advantages and disadvantages of START/STOP system?
- Software related to START/STOP DISABLE
- START/STOP training
What is The START/STOP System?
Environmental issues and reduction of industrial pollution is a topic which has involved many scientists, engineers and companies globally. In order to reduce fuel consumption and consequently reduce emissions in the transportation and automobile industry, companies are examining and trying everything. From aerodynamic manipulations and weight reduction of vehicles, to electrification and making software changes.
Of course, legislation of various laws by government was not ineffective in these endeavors and among these laws, could be mentioned a law which has been legislated by the European Union and according to this law, the amount of CO2 emission would be 95 grams per kilometer for each vehicle from year the 2020.
One of the systems which has been designed and created for this purpose (emission reduction) is the SRART/STOP system. Observing the heavy daily traffic and long stops that the car make, sparked the idea of a START/STOP system in the minds of inventors.
The function of this system works in a way in which it shuts down the car in case of it having to stop for a long time, which results in preventing its useless operation and pollution.
How Does The START/STOP System Work?
In the previous part, we realized that START/STOP system turns off the engine in cases of long stops. When you put your car on the neutral mode and release the clutch, (in cars equipped with manual transmission), or when you press the brake pedal after putting it on neutral mode (in cars equipped with automatic gear and double clutched cars), you activate the SRART/STOP system. Indeed, the START/STOP system is designed in a way, in which it reacts to the reduction of the RPM.

❓But "how is this reaction to RPM reduction, and generally, how does the car becomes aware of it?" You might ask.
The answer to this question is that, in fact, the SRART/STOP system reacts to the information coming from the sensors of the car, and does the action (stopping the car). information coming from the sensor of the crankshaft and numbers of wheel speed sensor, with the awareness of the car put on neutral by the driver, helps the START/STOP system in doing what its required. In other words, information from the mentioned sensors, coordinates with the engine management system (EMS), and then with working with START/STOP system, comes the stop or restart of the car. But this isn’t the whole story .Having a dynamic START/STOP system requires special changes and upgrades. Due to the multiple stops and starts that the SRART/STOP system imposes on the car engine and other components, it is necessary for certain parts of the car to be stronger than usual .for example it has been tried to use bearings that are several times longer in life than regular bearings in regular cars ,for the cars equipped with START/STOP system .in these bearings ,it has been tried to reduce the amount of friction as much as possible and to do the lubrication in the best way achievable. Besides the bearings, it has been tried to strengthen the starters of these cars because the engines of cars equipped with START/STOP system are started and stopped multiple times more than regular and as a result ,the starters of these cars face extreme tensions and need reinforcement (being said that various companies have tried to use direct combustion in the engine for restart, thereby, reducing the starter tensions .Nevertheless, there is still much debate and conflict over the impact of these innovations). In addition, it is obvious that the batteries of cars that contain a START/STOP system should be stronger than the batteries of ordinary cars because the START/STOP system takes a lot of energy from the battery (information about voltage, temperature and battery charge can also be witnessed from the Electronic Battery Sensor (EBS).
🚨In Here, it is Essential To Mention a Couple of Points About The Start/Stop System:
1. When stopping, the START/STOP system only turns off the engine and the other components of the car like ventilation system, power steering, audio system and other electronic components and systems continue to operate.
2. Some people mistakenly think that the start of the START/STOP system to restart is the same as the cold start of the car in the morning or after a period of inaction. There are fundamental differences between the two. In case of the start which happens in the morning, the car and its other components (as well as lubricants) are cold and can be harmful in some cases, but the starter that the start-up system makes to restart the car is not a cold start because the car components And the starters are hot.in fact, cars with START/STOP system also use the electric water pumps to maintain the desired engine temperature.
3. In case of ventilation system's need to restart (by any means), the engine will start again (regardless of any information that reaches the START/STOP system).
4. In sports cars that have dynamic and sport modes, by selecting them, the start-up system is automatically deactivated.
5. If the START/STOP system has turned off the engine, pressing the clutch pedal in vehicles equipped with manual transmission, as well as releasing the brake pedal and accelerating in vehicles with automatic transmission, will activate and restart the engine.
6. In cars with automatic transmission, if the car speed is reduced first and then the final stop is made using the handbrake, the engine will not turn off (the START/STOP system does not turn off the engine).
❓Well, so far so good! So why do some people think of eliminating the START/STOP system? We will answer this question in the part below.

What is The Reason for Eliminating START/STOP System?
The statistics claim that stopping sporadically in the vehicles in daily traffics is somewhere between 25 percent of driving cycle in Europe and 11 percent in United States. Other statistics claim that 14.8 billion liters of gasoline are wasted annually in the United States. Maybe if we add this statistic to the descriptions above, everything is in favor of the START/STOP system, but the issue is, unfortunately, not everything is always like what is claimed in the ads or mentioned in the stats.
The thing is, this system has significant problems. One of these problems is the depreciation that this system inflicts on the car engine. Although at the beginning of the text, we discussed boosting the battery, starter and some other components of cars that are equipped with a START/STOP system, but experience shows that these are not always enough. The high depreciation of this system cannot be ignored. These can cause some issues, such as vibration or noise in the car.
Another problem is the lack of START/STOP button on some cars. The START/STOP system is not a system that is required on all roads and driving modes, so if it is not possible to activate and deactivate this system manually, problems will arise for the car owner and driver.
All of the items above can be reasons why some drivers and car owners make the decision to eliminate this system.
📍If you have any question, feel free to contact us at: [email protected]
