How to Fix Hot Start Problem VAG Group (ECM Titanium)
What You Will Learn In This Course?
🚩In this session we’re going to learn how to fix Hot Start problem in Audi A3 2.0 liter turbo diesel engine with EDC17CP14 ECU.
If you learn this method, you can do it for another EDC ECUs. First of all, we should know about “Hot Start Problem”.
💬What is Hot Start problem?
These diesel engines are started by an ECU and not by the driver. Pressing the accelerator pedal has no effect during a starting procedure. Starting is actually controlled by a ‘starting map’ in the ECU and is based on starter or engine speed and injected fuel quantity or IQ.
Generally, the ECU will not allow start fuel injection until the engine rpm is above a fixed map value. Such problems can occur from low battery charge, engine coolant temperature sensor faults or the starter motor itself.
💬When engine temperature is high normally 80 to 100 degrees of centigrade, in some cars it takes several times to start and crank the engine. For example, engine coolant temperature is around 80 degrees of centigrade, and you start the engine, it takes several starts to turn on the engine. Here the magic comes, ECU remapping for hot start fix.
🏁Also you can read Diesel Hot Start Fix article for more information.
📍For more information and probable problems feel free to contact us: [email protected]
