ECM Titanium Training Course: Petrol ECU Remapping Online
Now playing: Tools you need for Chiptuning and ECU remapping
Log in to unlock this episode.
Tools you need for Chiptuning and ECU remapping
In this session, we will introduce you to all the tools needed for remapping an ECU so that you can run your own chip tuning business. To tune petrol and DIESEL engine ECUs, you should change the file inside the ECU, or EMS, which is related to controlling Torque limit, fuel injection, spark advance, etc.
The tools we will introduce below are for the people who aim to enter this job, and if the name of some brands is mentioned in this session, it is not a sponsorship, and they are mentioned just for their efficiency. As mentioned before about the ECU reflash, to do an ECU tuning project, you need to read the ECU file, remap the dump or ECU file you have, through ECU tuning software, and then write it on the ECU. This is the most straightforward and most basic type of ECU tuning.
To do that, you need three main things:
1-ECU programming tools
2-ECU remapping/tuning software
3-An ordinary PC
4-The technical knowledge of ECU remapping
1-ECU Programmer:
This tool is a connection device between the laptop and an ECU, which is used to read and write the ECU's memory in different methods.
2. ECU Remapping/Tuning Software:
When you read the ECU file by using programmers, there are two ways for file tuning:
1-sending the stock file to us; you will receive the modified file after 1 hour.
2-the second method is what we are about to teach you
Depending on how professional you are and the type of cars you will work on, you can choose one of the software options such as WinOLS or ECM titanium and etc. and start the work.
3. Personal Computer:
To install programming and remapping software, you at least need an ordinary PC.
4. The Technical Knowledge of ECU remapping:
The most crucial element in the remapping process is knowing how to remap. For instance, you should be able to analyze the ECU file of the car to extract the best remapping performance of your car.
5- battery stabilizer
To read and write, you need a battery stabilizer, one of the most necessary tools required; because the voltage must not be less than 12 while reading and writing
6 -DC workbench power supply
7 -Soldering and the necessary tools for it(Soldering iron,Tip of the soldering iron,Hot Air Heaters and ETC…)
8 - ECU probe workbench programming and Bracket Frame
9 -Dynamometer
10 -Engine dyno
11 - chassis dyno
12- Wideband AFR monitor
