DTC Removal Course: Fault Code Delete Training with WinOLS
What You Will Learn In This Course?
Quick answer: This online course teaches you how to find and disable fault codes (DTCs) in ECU files with WinOLS. It has 15 videos, an introduction and 14 lessons (1 h 30 min in total), covering Bosch MED17 and EDC17, Delphi, Continental, Siemens, Denso, Hitachi, Isuzu Transtron and Volvo TRW ECUs. You pay 298$ once and get lifetime access, free course updates and WhatsApp support from Saturday to Friday.
✅To follow the lessons, you can use the free WinOLS demo version from EVC for now.
How to Remove Fault Codes with WinOLS (free demo version)
In this training course, you will learn how fault codes (DTCs) are stored in an ECU file and how to disable selected codes with WinOLS, including P codes (powertrain) and U codes (network communication). The lessons cover the ECU families in the lesson list; other ECUs follow similar logic, but each file needs its own analysis.
🚩There are several tools for DTC off service work, including Swiftec and WinOLS. ECM Titanium does not offer a DTC off function for editing files. The Alientech KESS3 DTC function reads and resets stored codes through diagnostics, which is different from disabling them in the file. CaracalTech sells Alientech products such as ECM Titanium and KESS3.
You can learn DTC Removal/ Fault code Delete by WinOLS software.
In our opinion, WinOLS is the best software for DTC removal because it lets you open the raw ECU file and work on the fault code tables yourself, instead of being limited to the codes that a ready-made driver or plugin lists. This takes more knowledge, and that knowledge is what this course teaches.
🏁Besides, we give you the DTC Removal instructions in each of the mentioned applications so that you can select the one you are most comfortable with.
🏁If you have a file of ECU that is not on our training list, please send us. We will remove the DTC and then the file will be sent back to you.
Your submitted file will be listed as a training video in your panel once DTCs has been removed.
📍Also see our WinOLS training course (petrol) and the diesel ECU tuning course with WinOLS. If you would rather order a ready file than do the work yourself, our DTC solution file service lists 2,021 supported ECUs across 225 brands.
📍For more information and probable problems feel free to contact us: [email protected]
📍You can contact us at +36 70 604 8339 is the support WhatsApp number
What you will learn
- How P codes and U codes are stored in an ECU file, and the difference between clearing a code and disabling it
- The basic manual method for finding DTC entries in WinOLS
- Petrol ECUs: Bosch MED17, Delphi MT38 and MT22 series, Continental Simos, BMW Siemens MSV series
- Diesel ECUs: Bosch EDC17, Delphi DCM, Continental SID series, Isuzu Transtron, Volvo TRW
- Also: Hitachi ECUs and Denso ECUs used by Nissan and Toyota
Who this course is for
Tuners and workshop technicians who already read and write ECU files with a tool such as KESS3, Autotuner or Flex and want to do DTC off work on the file themselves. If you are new to WinOLS, start with the WinOLS training course (petrol) linked above.
What you need
- WinOLS: EVC, the maker, offers a free demo version and sells the full licence
- A read and write tool for your ECU (for example KESS3, Autotuner or Flex) to get the original file and write the modified file back
- Checksum correction, either in WinOLS with the right checksum module or in your read and write tool
- A Windows PC
Course facts
| Item | Details |
|---|---|
| Format | Online video course |
| Lessons | 15 videos (introduction and 14 lessons) |
| Total video time | 1 h 30 min |
| Software used | WinOLS |
| ECU makers covered | Bosch, Delphi, Continental, Siemens, Denso, Hitachi, Transtron, TRW |
| Access | Lifetime access, one-time payment |
| Updates | New lessons added free of charge |
| Support | WhatsApp, Saturday to Friday |
| Price | 298$ (as shown on this page) |
Common petrol and diesel DTCs
The table lists common generic OBD-II fault codes that tuners often see on petrol and diesel engines. Each code points to a system to check first; it does not by itself prove which part has failed.
| Code | Meaning | Engine type | System |
|---|---|---|---|
| P0420 | Catalyst System Efficiency Below Threshold, Bank 1 | Petrol | Catalytic converter |
| P0300 | Random Misfire Detected | Petrol | Ignition and combustion |
| P0171 | System Too Lean, Bank 1 | Petrol | Fuel mixture |
| P0136 | O2 Sensor Circuit Low Voltage (Bank 1 Sensor 2) | Petrol | Rear lambda sensor |
| P0325 | Knock Sensor 1 Circuit Malfunction | Petrol | Knock control |
| P0101 | MAF Circuit Range/Performance | Petrol and diesel | Air measurement |
| P0299 | Turbocharger/Supercharger A Underboost Condition | Petrol and diesel | Boost control |
| P0400 | Exhaust Gas Recirculation Flow Malfunction | Diesel (also some petrol) | EGR |
| P0401 | Insufficient EGR Flow | Diesel (also some petrol) | EGR |
| P0403 | Exhaust Gas Recirculation Circuit Malfunction | Diesel (also some petrol) | EGR |
| P0087 | Fuel Rail/System Pressure, Too Low | Diesel | Common rail fuel system |
| P0380 | Glow Plug/Heater Circuit A Malfunction | Diesel | Glow plugs |
| P2002 | Diesel Particulate Filter Efficiency Below Threshold, Bank 1 | Diesel | DPF |
| P2463 | Diesel Particulate Filter Restriction, Soot Accumulation | Diesel | DPF |
| P20EE | SCR NOx Catalyst Efficiency Below Threshold, Bank 1 | Diesel | SCR / AdBlue |
Code meanings as listed on obd-codes.com (generic OBD-II codes are defined in SAE J2012). Manufacturers can word them slightly differently, and manufacturer-specific codes (P1xxx, U-codes, SPN codes on trucks) differ from ECU to ECU.
Frequently asked questions
1. What will I learn in this DTC Removal training course?
In this course, you will learn how to find and disable DTCs (P codes and U codes) in ECU files with WinOLS. After an introduction video, the lessons start with the basic manual method and then work through Bosch MED17 and EDC17, Delphi MT38, MT22 and DCM, Hitachi, Continental Simos and SID, BMW Siemens MSV, Nissan and Toyota Denso, Isuzu Transtron and Volvo TRW files. After the course, you can apply the same method to other ECUs, with your own analysis of each file.
2. Do I get lifetime access to the course?
Yes. All our courses are online and after joining, you will get lifetime access to the course without paying any extra money, monthly subscription, or annual fee. You only pay once and you will have permanent access to all course materials and future updates.
3. Will the course be updated in the future?
Yes. Our website and courses are continuously updated. Whenever we add new training videos, new ECU types, new DTC removal methods, or new lessons, they will automatically appear in your dashboard for free. You do not need to pay anything for course updates.
4. Which ECUs are covered in this training course?
This course includes training on many different ECUs such as:
- Bosch MED17 and EDC17
- Delphi MT38, MT22 series and DCM (diesel)
- Continental Simos and SID series
- Siemens MSV series (BMW)
- Denso (Nissan and Toyota)
- Hitachi
- Isuzu Transtron
- Volvo TRW
We continuously add new ECUs and new training videos to the course.
5. Do I need WinOLS or other software before starting the course?
No, you do not need to buy any software before starting the course. You can follow the lessons with the free WinOLS demo version from EVC for now, and the course guides you on how to use WinOLS for DTC removal, map finding and ECU file editing.
6. Can I send my ECU file if it is not included in the training list?
Yes. If you have an ECU file that is not included in our training list, you can send it to us. We will remove the DTCs from your file and send the modified file back to you. Also, your file may be added as a new training video in your course dashboard so you can learn from real projects.
7. What is the difference between clearing and disabling a DTC?
Clearing a code with a diagnostic tool deletes it from the fault memory, but the ECU sets it again if the fault is still present. Disabling (DTC off) changes the ECU file so that the monitor for that code no longer reports it. This course covers disabling in the file with WinOLS; clearing with a scan tool is a separate diagnostic task.
8. Can I do DTC off with ECM Titanium or KESS3?
ECM Titanium has no DTC off function for editing files. The KESS3 DTC function, available with an active KESS3 subscription, reads and resets stored codes through diagnostics; it does not disable them in the file. For file-based DTC off you need software that lets you edit the file directly, such as WinOLS, which this course uses.
9. Can I order a DTC off file instead of doing it myself?
Yes. Our DTC off solution lists 2,021 ECUs across 225 brands, from $75 per file (1 credit). You send the original read and receive the modified file back. The course is the better choice if you want to do this work yourself on many files.
CaracalTech WinOLS DTC Removal Training Course | Feature & Advantage Matrix
| Core Advantage Domain | Specific Course Feature | Practical Value for Tuners | Distinctive Competitive Edge |
|---|---|---|---|
| Software | WinOLS demo version | Start the lessons with the free WinOLS demo version from EVC, with setup guidance in the course. | Lets you learn the method before you buy a full WinOLS licence. |
| DTC Technical Scope | Complete P-Code & U-Code Mastery | Learn to permanently disable diagnostic trouble codes (both powertrain P-codes and network communication U-codes) manually. | Gives you direct control over which codes are disabled, instead of a fixed list in automated software. |
| Software Superiority | Hex-Level Manual DTC Finding | Learn to find DTC switches manually in WinOLS, which is needed because file tools such as ECM Titanium have no DTC off function. | Works on the raw file, so you are not limited to the codes that a driver or plugin lists. |
| Custom DTC File Service | Student File-to-Video Program | Submit unlisted ECU files to our engineers; receive your cleared file back plus a personalized video tutorial added to your dashboard. | Transforms your real-world customer ECU problems directly into customized learning material within 1 week. |
| Live Support Line | Direct WhatsApp Assistance (+36 70 604 8339) | Connect with expert calibrators Saturday to Friday to resolve live DTC suppression and hex-editing challenges. | A direct line to ask questions while you work on your own files. |
| Multi-Brand ECU Coverage | Cross-Platform DTC Logic | Learn fault code suppression across major ECU families including Bosch (MED17, EDC17), Delphi, Continental, Denso, Siemens, Hitachi, Transtron and TRW. | Gives you a method you can apply to other ECUs, with your own analysis of each file. |
| Bonus Course Credit | $350 Instant Credit Allowance | Receive $350 in credits to enroll in 5 additional $70 CaracalTech courses to expand your shop's tuning lineup. | Maximizes return on investment by unlocking complementary remapping and calibration skills. |
| Subscription Model | One-Time Payment (Lifetime Access) | Pay once to secure lifetime access to all DTC training videos without recurring monthly or yearly subscription fees. | Completely avoids recurring software subscription costs and platform lock-in fees. |
| Platform Evolution | Free Lifetime Curriculum Updates | Enjoy automatic, zero-cost updates whenever new ECU DTC protocols, hex structures, or videos are published. | Keeps your diagnostic suppression skills up-to-date with newly released vehicle ECUs. |
Usage note: DTC off on emissions-related components (for example DPF, EGR, SCR/AdBlue, lambda or NOx sensors) is supplied for off-road machinery and motorsport vehicles only, where local regulations permit; it is not intended for vehicles used on public roads.
