whatsapp logo
ECU Remapping Course

Petrol ECU Tuning Course with WinOLS – Online Training

Published Updated
498$4.2 (98)316 enrolled

Petrol ECU Tuning Course with WinOLS – Online Training

Episodes
38
Time
12:22:40
Price
498$
Other Episodes

1 - What You Will Learn In This Course?

00:01:46

2 - Introduction of EFI system

00:22:14

3 - The types of ECUs

00:11:08

4 - What is ECU remapping and ECU cloning?

00:13:23

5 - Tools you need for Chiptuning and ECU remapping

00:20:46

6 - The types of programmers

00:24:53

7 - How to Read and Write ECU and Reflash

00:22:29

8 - ECU Programming on the bench

00:21:33

9 - Types of tuning software

00:18:38

10 - WinOLS software

00:20:39

11 - Engine torque categories

00:43:10

12 - Air control category

00:46:21

13 - Ignition timing and spark advance

00:38:10

14 - Injection system and Injection tables

00:51:57

15 - Turbo system categories

00:19:21

16 - Variable Valve Timing System ( VVTI )

00:06:52

17 - Limiters (ECU)

00:05:41

18 - How to modify the tables? (WinOLS)

00:29:31

19 - Bosch ME7 basic

00:32:48

20 - Bosch ME9 ECU training

00:14:40

21 - Bosch ME17 ECU training

00:21:06

22 - Bosch MED17 ECU training

00:14:09

23 - DTC / Fault Code Removal

00:05:45

24 - BOSCH MED17 DTC delete training

00:05:19

25 - Fuel cut for pop & bang

00:11:12

26 - Mitsubishi ECU training

00:06:44

27 - Mercedes-benz A200/BOSCH MED17

00:14:01

28 - Delphi MT86 ECU Tuning

00:12:28

29 - Continental sim2k-241 ECU training

00:09:13

30 - How to use DAMOS files in WinOLS

00:06:02

31 - transfer tuning files

00:04:34

32 - Hitachi DTC delete training

00:05:19

33 - Delphi dtc delete training

00:04:23

34 - basic DTC finding

00:10:08

35 - How to Make Script in WinOLS Software

00:04:00

36 - BMW-Mevd 17 Bosch

00:19:58

37 - How to find ECU table of Bosch MED17 ? (Mercedes-Benz C 43)

01:11:27

38 - Description table of Bosch MED17? (Mercedes-Benz C 43)

00:17:16

39 - How to modify ECU table of Bosch MED17 ? (Mercedes-Benz C 43)

00:35:22
Information

What You Will Learn In This Course?

Quick answer: The WinOLS Petrol training course is an online ECU remapping course for beginners and workshop technicians. It has 39 videos (about 12 h 24 min) on EFI basics, ECU reading and writing, and finding and editing torque, air, ignition, injection and boost maps in WinOLS, with lessons on Bosch ME7, ME9, ME17, MED17 and MEVD17, Delphi MT86 and Continental SIM2K-241 ECUs. Price 498$, lifetime access, WhatsApp support Saturday to Friday and $350 credit for five other courses.

WinOLS Petrol training course

Advantages of our Training Course:

✅ You can use the free WinOLS demo version from EVC for now to follow the lessons; a full WinOLS licence is bought from EVC when you start working on customer files (see our WinOLS software guide).

🚨By purchasing this course, you will receive $350 in extra credit, which you can use to join five of our $70 courses (5*70 USD courses).

Our Software WinOLS training course includes 39 videos (an introduction plus 38 lessons, about 12 h 24 min) and by purchasing it, you will have lifetime access to it through our website.
First you need to watch all sessions and then, if you need more explanations for the topics, then we have support Saturday to Friday, during and after courses and we will respond quickly to your questions and help you solve your problems. 
Those who participate in our courses and become our students will benefit from five free 70 USD courses.
Also, if you have a specific model of a vehicle or an ECU that you are interested in learning how to remap, and its video is not available on our website, let us know, and we will prepare a tutorial video for you within a week and upload it to our site.

None of our courses require a monthly or annual subscription fee, and once purchased, they will remain active in your profile for lifetime.

Additionally, all of our courses are updated over time and new episodes are added to them. All of these updates will be added to your profile for free and automatically, without the need for any additional payment to receive them.   

🚨This course covers A to Z of Petrol tuning for all popular ECUs like Bosch, Siemens, Delphi, Hitachi, Continental and etc.

By purchasing this course, you will benefit from the following advantages:

- 10% discount on the purchase of the Kess3 programmer

- 10% discount on the purchase of other CaracalTech courses

📍You can contact us at +36 70 604 8339 is the support WhatsApp number

Who this course is for

  • Beginners who want to learn petrol ECU remapping step by step.
  • Mechanics and workshops that want to add ECU tuning to their services.
  • Tuners who already use ECM Titanium and want to work with WinOLS.
  • Students who plan to continue with diesel tuning later.

What you need

  • A Windows PC (WinOLS runs on Windows 10 and 11, 64-bit).
  • WinOLS from EVC: the free demo version for learning, a full licence for customer work. Use legal software only.
  • An ECU reading tool such as KESS3, Autotuner or Magicmotorsport Flex when you start working on real cars (see ECU tuning tools compared).

Course facts

ItemDetails
Videos39 videos: an introduction plus 38 lessons, about 12 h 24 min in the video list
Price498$ (one payment)
AccessLifetime access, no monthly or yearly subscription; new lessons are added free
SoftwareWinOLS (free demo from EVC for learning); ECM Titanium and Race Evo are also introduced
ECU lessonsBosch ME7, ME9, ME17, MED17 and MEVD17 (BMW), Delphi MT86, Continental SIM2K-241, Mitsubishi; DTC lessons for Bosch MED17, Hitachi and Delphi
Practical projectsBosch MED17 on a Mercedes-Benz A200 and C 43 (find, describe and modify tables)
SupportWhatsApp support, Saturday to Friday
Bonus$350 credit for five $70 courses; 10% discount on KESS3 and other CaracalTech courses

WinOLS tuning course History:

❓How to become a chip tuner and start your own ECU Tuning business:
Many years ago, while we were students ourselves, we decided to study vehicle software calibration and their effects on the engine performance. To accomplish this, we needed to access the ECU data to make the changes we needed. We had to learn ECU remapping. For this purpose, we searched for ECU tuning, ECU remapping training course and ECU Programming tools and etc.
After long hours of searching for information that was highly scattered around the internet, we found out that some of them were inapplicable and couldn't find the articles, tutorials, or proficient books that we required in this field.
Then, we decided to participate in online and in-person tutorial workshops of some companies. Later, it seemed that most of the information was thought selectively and inefficiently, as an example, they would only teach their own software products or instruct how to study a few models of ECUs.
Eventually, we spent around a year studying how to read and write on an ECU or otherwise known as ECU programming. It's been 9 years since that time that we've gathered a highly valuable information about this field, and after many years of experience and projects in ChipTuning, ECU source code studying, doing trials and errors with tools and software, and experience with the dynamometer and remapping a wide range of car ECUs, we came into an idea…
We decided to prepare a useful ECU and TCU Tuning tutorial course for people who are interested in and the ones who are ready to start their own business. 
A simple, yet a valuable and centralized course. In other words, what we learn in theory is different from reality. No other course would explain the ECU remapping step by step and with practical evidence. Instead of teaching you how to catch fish, they give you the fish instead!
Some of the online tutorial sessions are ONLY 4 hours long! But who can become a chip tuner in such a short period?
In this course, we will principally educate you with step-by-step and simple guides on ChipTuning and remapping.

💬What You Will Learn in WinOLS Tuning Course:

1- Introduction to injection system, sensors, and actuators

2- You'll learn what ECU remapping or programming is and why we need to do that.

3- Introducing types of ECUs for Petrol, Diesel and also the automatic transmission.

4- We will introduce and explain all the tools needed for chiptuning a car's ECU; ECU Reflash, Chiptuning and Programming training. 

ECU reading methods: KESS on the OBD port with a laptop, bench connection on an open ECU board, a bench frame and a handheld programmer
ECU Reflash ,Chip tuning and Programming training 

A- ECU programming tools

B- ECU remapping or tuning software

C- Personal Computer

D- Soldering kit that includes items such as soldering iron, hot air station, solder and etc. And how to work with this tool. 

E- Dynamometer

F- Wideband gauge

5- We will introduce the required programming tools, we also have technical reviews and the comparison between the programmers, so you can choose the best one that is suitable for you. Programming tools like (KESS3, KESS V2, K-TAG, Dimsport My Genius and Autotuner; KESS V2, K-TAG and My Genius are older tools that are no longer sold as new products).

ECU programming tools: Alientech KESS, a bench programming kit, Alientech K-TAG and Dimsport My Genius
ECU programming tools for Chiptuning

6- We will introduce the required software, we also have technical reviews and the comparison between the software, so you can choose the best one that is suitable for you. Software like (WinOLS, ECM Titanium, Race Evo and etc.). 

Tuning software screens: WinOLS maps, an ECM Titanium 3D map and Race Evo
ECU Tuning and Remapping software training course

7- You will learn how to safely read and write file on an ECU with different methods such as "OBD, bench, boot and JTAG" with proper tools and programmers.

8- After you learn how to program an ECU and read the file, we will introduce you to an ECU dump, types of tables, how they work, and their changes in ECM Titanium and WinOLS software. For instance, what is the concept of torque-based ECU and how it works or what the spark advance is, how it works, and how we should change it. In the same way, the instruction will be done for all the tables like fuel, torque, engine load, turbo, air inlet, etc.

9- In order to become an expert, we will do the full remap procedure within practical projects on vehicles such as Porsche, Volkswagen, BMW, etc. It means that we will move forward with the preparation steps, vehicle survey, reading ECU file, remap in various software, writing a file on ECU, and some tests together.

WinOLS map table, hex graph view and 3D map of a petrol ECU calibration
WinOLS ECM Titanium online training course 

10- After remapping, you will write the file on an ECU and will learn how to test the tuned vehicle on dyno and see the results.

🏁In the next step, you will become an experienced person with ECUs and can decide whether to change the ECU file and test it using the dynamometer to achieve the best results.
You can also extend your information by attending our advanced online courses with having online backup support. 

📍If you need ECU remapping file, upload original ECU file in Tuning File Service, our experts send you the remapped file.

📍For more information and probable problems feel free to contact us: [email protected] 

Related courses and guides

WinOLS petrol course FAQ

1. What will I learn in the WinOLS Petrol tuning course?

In this course, you will learn ECU remapping and chip tuning from beginner to professional level using WinOLS and other tuning software. The course covers ECU reading and writing, map finding, fuel maps, ignition maps, torque maps, boost control, checksum, damos/map packs, and full remapping process on real vehicles. You will also learn how to work with different ECUs like Bosch, Siemens, Delphi, Hitachi, and Continental.

2. Do I get WinOLS software with the course?

No full WinOLS licence is included. You can follow the lessons with the free WinOLS demo version from EVC for now, and buy a full licence from EVC when you work on customer files. The course teaches how to use WinOLS for ECU remapping, map detection, file editing and tuning.

3. Do I get lifetime access and future updates?

Yes. All our courses are online and come with lifetime access. You only pay once and there is no monthly or yearly subscription fee. All future updates, new training videos, and new lessons will be automatically added to your dashboard for free.

4. What is the $350 course credit included with this course?

By purchasing this course, you will receive $350 in credit which you can use to join five of our other courses worth $70 each. This allows you to expand your knowledge in ECU tuning, DTC removal, diesel tuning, and other training programs.

5. Which ECUs are covered in this WinOLS tuning course?

This course covers most popular petrol ECUs such as:

  • Bosch ECUs
  • Siemens ECUs
  • Delphi ECUs
  • Hitachi ECUs
  • Continental ECUs
  • And many other ECU types

We also continuously add new ECUs and training videos to the course.

6. What if I want training for a specific ECU or car model?

If you are interested in a specific vehicle model or ECU and the training video is not available on our website, you can request it. We will prepare a tutorial video for that ECU or vehicle and upload it to the website, usually within one week, and it will be available in your dashboard.

7. Is this an official EVC WinOLS training?

No. This is CaracalTech's own online video course. EVC, the maker of WinOLS, runs its own official WinOLS trainings in Dinslaken and online; its online basic petrol training is listed at €3,272.50 (EVC training courses, checked 15 Nov 2026). Our course focuses on petrol ECU remapping in recorded lessons with lifetime access.

8. Is there a diesel version of this course?

Yes. The diesel WinOLS course covers diesel ECUs, injection, rail pressure and boost maps. If you prefer Alientech software, the ECM Titanium petrol course teaches the same petrol topics in ECM Titanium.

 CaracalTech WinOLS Petrol Tuning Course | Feature & Advantage 

CategoryCourse FeatureStudent BenefitCompetitive Advantage
SoftwareFree WinOLS demo from EVCFollow every WinOLS lesson with the free demo version from EVC; buy a full licence from EVC when you start customer work.No software cost to start learning.
Bonus Value$350 Extra Credit (5 Free Courses)Instantly unlock 5 specialized $70 Petrol courses (e.g., DTC Off, Pop & Bang, CAT/EVAP Delete, Speed Limiter, etc.) for FREE.Provides the highest added financial value compared to any other petrol tuning course on the market.
Course MaterialsComprehensive Practice LibraryGain full access to Petrol files, map packs, original ECU dumps, and step-by-step PDF guides.Enables hands-on practice on real petrol project files alongside video tutorials.
Technical SupportLifetime WhatsApp SupportAccess continuous, fast technical support Saturday to Friday to solve live project issues.Complete post-course support ensuring students are never left without expert help.
Custom ContentOn-Demand Video RequestsRequest training for specific Petrol ECUs or car models and receive custom video uploads within 1 week.The only course curriculum that updates based on individual student requests.
Pricing ModelLifetime Access (Zero Subscriptions)Pay once for permanent access without recurring monthly or annual membership fees.Eliminates hidden fees and mandatory yearly subscription renewals.
Course UpdatesFree Automatic Lifetime UpdatesAutomatically receive all future video lessons, new Petrol ECU protocols, and updates at no extra cost.Keeps your skills permanently up-to-date as gasoline ECU technology evolves.
Training QualityA to Z Real-World Petrol RemappingLearn on real performance vehicles (Porsche, BMW, VW, Mercedes) using dyno testing and log analysis.Practical, step-by-step methodology instead of surface-level 4-hour quick guides.
ECU CoverageMulti-Brand Petrol ECU MasteryMaster all market-leading Petrol ECU families including Bosch, Siemens/Continental, Delphi, Hitachi, Denso, etc.Comprehensive coverage preparing you directly to start your own petrol tuning business.
Hardware DiscountExclusive 10% Hardware DiscountReceive an exclusive 10% discount code on KESS3 hardware purchases and future courses.Lowers the initial investment cost for essential professional tuning tools.

Usage note: lessons on DTC removal and similar emissions-related functions are for off-road machinery and motorsport vehicles only, where local regulations permit; they are not intended for vehicles used on public roads. Pop and bang (fuel cut) lessons are for motorsport and track use only, and public-road speed limits always apply.

Rate: 4.20 (98)

Enjoyed the content? Add us as a preferred source to see more of it in Search.

Add as a preferred source on Google
Community
Comments:
MarMar(June 13th 2022)
best afr for the performance
how we can calculate the best afr for the performance?
john(June 14th 2022)
best training course
Hi very good , especially map explanation
Micheal(June 15th 2022)
WinOLS
Hi I bought the course and see very good explanation on everything. I have question, you talked about pop and bang and now how can I make pop and bang with louder sound? thanks for the good training
Lincoln(June 23rd 2022)
Work
in bosch med17 Training course, i see how you modified optimal engine torque vs requedted engine load, i need to know if we can use this method to all or only med17
Haleh(June 23rd 2022)
Ecu tuning
in air control strategy, do we need to modify throttle operating angle or not?
Javad(June 23rd 2022)
Question
when we decat, we see P0420 as DTC, how can we remove it?
jac(June 23rd 2022)
winols
i have WinOLS licened and i bought this training course, it is very good, and teaches every maps in detali and i learnt and now i can remap , good course
amir(June 23rd 2022)
ecu tuning
best training course ever.
srp(June 25th 2022)
hi
Helli caracaltech, i remaped my skoda yetti based on the training med17.5 ecu, and it worked. thank you. very good training
Kevin(January 17th 2023)
Pop & Bang
Should I correct the Optimal Spark Advance tables too?
amin(July 3rd 2023)
Satisfaction
The article was great
sina(July 17th 2023)
WinOLS course
this course is very useful thanks
sajad(October 14th 2023)
best remapping Course
I took this course and it was very useful
sajad(October 14th 2023)
Permanent education
Congratulations to Caracal Tech team specially for best support and solving Problems.
Jack (October 15th 2023)
Powerful Training
The world of ECU Remapping is very wide and with the help of this course you can enter it Safely.
خالد(October 16th 2023)
فی الصحرا...نعم...
التنقل في الصحراء يتطلب سيارة تتمتع بقابليات معادة تعيينها لتسلق التلال. سيكون أفضل لو تتمكن من إجراء عملية إعادة التعيين بنفسك.
Andrei(October 17th 2023)
рай для тренировок по переназначению карт.
вы будете гордиться тем, что изучили WinOLS на этом курсе.
Mason(January 2nd 2024)
Question on this tutorial
We saved our READ on the Ktag software. and that read file is stock data file (if we've never tuned it before). And let's say we tuned the file and saved the tuned file with other name and the previous READ file also being saved as is. Later on if I want to change my tuned ECU to stock ECU, can I just write the READ file to the tuned ECU?
Nirosh (September 9th 2024)
Kristian(February 12th 2025)
WinOls
Can i apply the knowledge from this course to a 2012-2020 vehicles or this is for old cars before 2010 and after the course will i know how to turn DPF and EGR off?
joan(July 15th 2025)
factors and offsets
Hello, have a question, what is the best form for calculate the factor and offset? thank you
Mechanic(August 2nd 2025)
A Suggestion.
Please make the toolbar / scroll bar more transparent, at the bottom of the video player. Reason: While video is paused, the scroll bar at the bottom does not hide, thus very difficult to read the subtitles while the video is paused. However, If transparency of the scroll bar's color is reduced then subtitles would be very easy to read. Thanks and Regards, Mechanic Mash
mohamad(March 11th 2026)
how to find maps
hi i want to ask is this course teach how the find the maps we need for stage 1,2,3 for any ecu ??? or the maps are already shown on the videos ?