whatsapp logo
Technical Article

WinOLS DAMOS, A2L Files, Mappacks and Scripts Explained

Published Updated
WinOLS DAMOS, A2L Files, Mappacks and Scripts Explained

Quick answer: A DAMOS or A2L file is a description file from ECU development: it lists the names, addresses, sizes and scaling of 2,000 to 10,000 maps for one software version, but holds no map data itself. A WinOLS mappack is a set of map definitions you load onto a file with matching software. CaracalTech offers a WinOLS mappack database built from DAMOS and A2L data: 1,598 ECU and TCU mappacks with 523,532 named maps for 244 vehicle brands, each previewable before download. Scripts automate WinOLS work in LUA.

Download WinOLS mappacks built from DAMOS and A2L data

If you are looking for a WinOLS mappack, DAMOS-based map list or A2L-based mappack for your ECU, the CaracalTech WinOLS mappack database lists 1,598 ECU and TCU mappacks with 523,532 named maps for 244 vehicle brands: 1,137 car, 207 truck, 34 bus, 153 agricultural, 57 industrial and 3 boat mappacks. Each map is named, sized and sorted into folders such as torque, fuel, boost, ignition and limiters. You can open every mappack in a WinOLS 5 preview before you pay, and the file is sent in under 5 minutes after the team confirms your ECU. If your control unit is not listed, CaracalTech can build the mappack from your read.

Find your ECU and preview its mappack

WinOLS Damos, Mappack, Script and A2L:

This article explains what each of these files does in WinOLS, where it comes from and how they work together when you remap an ECU.

What is Damos?

A DAMOS file is a description file that comes from ECU development. It does not contain the ECU software or the map values. Instead, it lists the maps, curves and constants of one specific software version with their names, memory addresses, sizes, axes and conversion factors. EVC, the maker of WinOLS, explains that the development systems of vehicle manufacturers show each map with its scaling, sampling points and label, while only the data itself is stored in the ECU. Names and addresses are kept in separate files, and DAMOS and ASAP2 (A2L) are the formats used by almost all German vehicle manufacturers. One such file can describe 2,000 to 10,000 maps.

In WinOLS, a DAMOS or A2L file is imported with the paid option OLS521 "DAMOS and ASAP2 Import" (€785.40 including 19% VAT on the EVC site). WinOLS then places the named maps on the matching binary file, so the tuner sees real map names instead of searching the hex data by hand. A DAMOS file only fits the exact software version it was made for. These files are not public: EVC states that it neither has them nor knows where to get them, so treat files offered online with care and check that they match your software number.

What is WinOLS Mappack?

A WinOLS mappack is a set of map definitions: for each map it stores the name, address, size, axes and factor, usually sorted into folders. A mappack does not change the ECU file on its own and contains no tuning. It is built once in a project where the maps are already known (found by hand, by the WinOLS map search or from a DAMOS/A2L import), exported, and then imported into another project with the same or very similar software. WinOLS then shows the same maps on the new file, and the tuner only edits the values. The CaracalTech mappack library lists 1,598 mappacks with 523,532 maps for cars, trucks, buses, agricultural and industrial machines, each with a preview in WinOLS 5. Browse the CaracalTech WinOLS mappacks.

🚨Also we can make Mappack of any type of ECU (and TCU) you want with 100USD.

Popular ECU and brand mappacks in the CaracalTech library

These examples show how many mappacks a search on the CaracalTech mappack page returns for common ECU families and vehicle brands (checked on 16 November 2026). A search also matches close variants, so one family can include several software versions.

ECU familyECU makerMappacksNamed maps
MG1CSBosch3542,443
MED17.5Bosch3026,616
EDC17C49Bosch2823,638
SIMOS 18Continental1938,494
EDC17CP14Bosch71,722
ME7.5Bosch71,497
DCM3.5Delphi61,429
EDC16C34Bosch5539
EDC17C46Bosch41,628
EDC17C64Bosch42,220
Vehicle brandMappacksNamed maps
Volkswagen10559,659
Audi10468,286
Cummins (engines)10211,268
Peugeot4410,900
BMW4325,640
Mercedes4312,629
Ford407,699
Hyundai335,649
John Deere172,597
Iveco152,733
Scania11584

What is A2l File?

An A2L file is the standard version of this idea. A2L follows ASAM MCD-2 MC, also called ASAP2, which defines the description format of the internal ECU variables used for measurement and calibration. According to ASAM, the description holds the data types, dimensions, record layouts and memory locations of ECU variables, and it explains how raw values are converted into readable physical values. It supports lookup tables with up to 5 dimensions.

A2L files are created by the ECU supplier or the vehicle manufacturer during development and are used by calibration and measurement tools. For a tuner, an A2L file does the same job as a DAMOS file: it gives map names, addresses and scaling for one software version. Like a DAMOS file, it must match the exact software in the ECU, and WinOLS needs the OLS521 option to import it.

How To Make Script in WinOLS:

WinOLS scripts are written in the LUA language and need the paid option OLS530 "LUA for WinOLS" (€1,178.10 including 19% VAT on the EVC site). A script can run on demand on the open project, or run all the time and process incoming files. EVC gives examples such as reading or writing single bytes in a project, or applying changes to each incoming file depending on its Bosch number. The WinOLS online checksum search is itself written in LUA. To start, download the handbook and the sample scripts from the EVC LUA page, adapt a sample, and test it on a copy of a project; WinOLS 5.70 with OLS530 3.005 and newer has a separate LUA debugger. EVC points out that LUA is a scripting language, not a ready-made solution, so it needs programming knowledge.

DAMOS vs A2L vs mappack vs script

ItemWhat it isWhere it comes fromWhat you need in WinOLS
DAMOS fileDescription of maps (name, address, size, scaling) for one software versionECU development (supplier or vehicle maker)Option OLS521, €785.40 incl. VAT
A2L fileASAM MCD-2 MC (ASAP2) description of ECU variables and mapsECU development (supplier or vehicle maker)Option OLS521, €785.40 incl. VAT
MappackSet of map definitions exported from one WinOLS projectMade by a tuner in WinOLSStandard WinOLS import and export
ScriptLUA program that automates WinOLS tasksWritten by the user or taken from EVC samplesOption OLS530, €1,178.10 incl. VAT

Prices from the EVC option pages, checked on 16 November 2026; they can change.

Conclusion:

DAMOS and A2L files name the maps, a mappack carries those names to other files with the same software, and scripts repeat routine steps. None of them changes how the engine runs on its own: the values are still set and checked by the tuner. Used together, they save time and reduce the risk of editing the wrong map.

DAMOS, A2L and mappack FAQ

What is a DAMOS file?

A DAMOS file is a description file from ECU development. It lists the maps of one software version with their names, addresses, sizes and scaling, so WinOLS can show named maps on the matching binary file. It does not contain the map values, and it only fits the exact software version it was made for.

What is the difference between DAMOS and A2L?

Both describe maps and variables for one ECU software version. A2L is the ASAM MCD-2 MC (ASAP2) standard format, while DAMOS is another description format used by German vehicle makers. For a tuner they do the same job, and WinOLS imports both with the OLS521 option.

Do I need a DAMOS file to tune an ECU in WinOLS?

No. Many maps can be found by hand or with the WinOLS map search, and a mappack can bring map definitions from another file with the same software. A DAMOS or A2L file simply saves time and gives the official map names.

Can I download WinOLS mappacks for free?

Free mappacks found online are often made for a different software version or come from unknown sources. You can build your own mappacks in WinOLS, or buy ready ones; the CaracalTech WinOLS mappack library lists 1,598 mappacks with a preview of every map before you buy. Avoid cracked WinOLS versions or files of unknown origin.

Does WinOLS open A2L files without an extra licence?

No. Importing DAMOS, A2L, A2LZ, ASAP2 and DAM files needs the paid option OLS521 "DAMOS and ASAP2 Import". Without it, you can still work with mappacks and find maps by hand.

Where can I download a WinOLS mappack for my ECU?

Search your ECU name, such as EDC17C49, MED17.5 or SIMOS 18, on the CaracalTech mappack page. It lists 1,598 mappacks for 244 vehicle brands; you can preview every map in WinOLS 5, then order the file, which is sent in under 5 minutes after the ECU match is confirmed.

Related pages

Sources

📍For more information and probable problems feel free to contact us: [email protected]

Keywords:a2l filedamosdamos a2ldamos filedamos mappackmappack downloadwinols damoswinols mappackwinols mappack downloadwinols script

Enjoyed the content? Add us as a preferred source to see more of it in Search.

Add as a preferred source on Google
Your Rating
Rate: 4.50 (26)
Community
Comments: