ECM Titanium Training Course 


🚩In This Article we’re going to Talk about What is CaracalTech ECU Remapping Course and what do we teach Here? And What are The Contents of our Training?

  • In our ECM Titanium training course, we teach the basics and fundamentals of ECU remapping for petrol and diesel engines.
  • We teach about tools and programmers that you need to start your chip tuning business.
  • We teach you how to use ECM Titanium software.
  • We teach all the tables like, spark advance, optimal engine torque, requested engine load, turbo pressure etc.
  • We have different training courses; some courses are for special cars and ECU like Volkswagen new beetle and some of them are free training course.
  • We use different cars that have the same control unit for the best training.
  • We have unlimited support for our customers.

After purchasing the training course, you can watch the training courses as many as you need.

📍And if you have any question regarding to the training you can ask support@caracaltech.com

💬ECM Titanium Training Contents are:

  1. First, we teach EFI fundamental and basic.
  2. Then we teach tools an programmers and software you need for ECU remapping.
  3. We teach how to use KESS V2 and KTAG to read and write the ECU.
  4. We teach you how to use ECM Titanium.
  5. Then we talk about the basics and fundamental of ECU main tables. 
  6. We talk about “Optimal Engine Torque” and “Torque request “.
kess ktag ecm titanum module
KESS & KTAG & ECM Titanum Module

💬To Have a Complete Understanding about The Optimal Engine Torque, We Teach You:

  1. What is engine torque? 
  2. What is torque-based engine management system?
  3. What is mathematical model of the engine torque or optimal engine torque?
  4. What is the application of these tables in the remap and tuning?
  5. Optimal engine torque in ECM Titanium

💬And to Have a Complete Understanding about The Torque Request, We Teach You:

  1. Why did the mechanical throttle replace the electric throttle?
  2. What is a Torque request table? And type of them.
  3. What effect achieve the changes in these tables have on the vehicle’s performance?
  4. Torque request table in ECM Titanium.

💬And in The last Part of Engine Torque Categories, we teach you about Torque Limiters and Their Different types.

In the next part, we teach you Air control category that has the following main tables:

  1. Throttle valve operating angle 
  2. Air Mass Through Throttle
  3. Requested Engine Load

💬To Have a Better and Complete Understanding, First we discuss about Throttle Valve Operating Angle and Air Mass Through Throttle and Then we talk about Requested Engine Load.

To understand throttle valve operating angle and Air Mass Through Throttle Tables, first we should learn the following topics.

  1. What is Air Control System?
  2. What is Throttle Body System?
  3. How Air passes Through Throttle and enters to the engine?
  4. Air Mass Through Throttle Valve Table in ECU
  5. Throttle Valve Operating Angle Table in ECU
  6. The relation between these two tables

✅And after that we will analyze these tables in the ECM Titanium.

  1. We talk about air mass through throttle valve in the ECM Titanium.
  2. We talk about throttle valve operating angle in the ECM Titanium.
ECM Titanum user interface
ECM Titanum user interface

💬After This Part, we talk about Requested Engine Load and for Better Understanding Requested Engine Load, First of All we teach you The Following Topics:

  1. What is engine load? 
  2. How is it calculated?
  3. What is the importance of the requested engine load table?
  4. What is the application of this table in remap and tuning?
  5. Requested engine load table in ECM titanium.

💬In The Next Session we are going to talk about “Ignition Timing and Spark Advance Tables in The ECU”.

To better and complete understanding of this session, we teach you:

  1. What is Ignition System and how it works?
  2. What is Ignition Timing?
  3. What is Spark Advance and retard?
  4. The effects of Ignition Timing on engine performance
  5. Basic Spark Advance
  6. Optimal Spark Advance
  7. Spark Advance tables in the ECM Titanium software

💬And Then, we’re going to talk about “Injection System and Injection Tables in ECU”

To better and completely understand this part, first, we will teach you the following topics.

  1. What is an Injection System and how does it work?
  2. Types of Injection Systems?
  3. What is AFR?
  4. What is lambda
  5. The effect of Air/Fuel Ratio on engine performance

Injection tables in the ECM titanium software such as:

  1. Requested lambda
  2. EGT or Exhaust Gas Temperature
  3. Lambda for component protection

🏁And Then, we are going to Talk about The “Turbo System and Its Related Tables in the ECU”.

Content of this session are as follows:

  1. What is a Turbocharger and how does it work?
  2. How Turbocharger is controlled in new ECUs
  3. PID control
  4. ECU's main turbo tables
  5. Turbo Tables in ECM Titanium?
  6. How to modify the tables and how to remap the ECU
  7. Some training examples that show you the process of ECU remapping from A to Z.

🚨If you want to be a ECM Titanium user and purchase its license, contact us via +1 (778) 300-2603 or email support@caracaltech.com

🔥Learn ECU remapping online in CaracalTech.

📍If you have any question, feel free to contact us at: Support@CaracalTech.com