Diesel ECU Tuning Course with WinOLS – Online Remap Training
Now playing: DPF/EGR/SCR system
Log in to unlock this episode.
DPF/EGR/SCR system
Control of diesel engine emissions and compliance with the Euro standard are two of the most important things in the production and technology of diesel engines during these years
Therefore, modern diesel engines' most important systems and technologies are geared toward pollution control.
To better understand how these systems operate, we decided to examine them separately in this section. We are related directly to these technologies in several cases when discussing diesel engine tuning.
Exhaust-gas recirculation (EGR)
After combustion, a certain amount of burned gas is left in the cylinder (internal exhaust-gas recirculation). The size of that proportion can be deliberately determined by valve-timing. In addition, more exhaust gas can be diverted from the exhaust system by an exhaust-gas recirculation valve and returned (via a recirculated-exhaust-gas cooler if required) to the intake side of the engine (external exhaust-gas recirculation). This process is sometimes referred to as EGR (exhaust- gas recirculation) and is a useful method for reducing NO x emissions.
The NOx-reducing effect of exhaust-gas recirculation is based on three mechanisms:
. Reduction of the oxygen concentration
in the combustion chamber
. Reduction of the amount of exhaust gas expelled, and
. Reduction of temperature by virtue of the greater thermal capacity (specific heat) of the inert gases1) H2O and CO2.
Diesel Particulate Filter Technology (DPF)
- DPF is one of many technologies developed to reduce air pollution and improve the environmental conditions of the Earth ,with an exclusive share in the vehicle market. Many countries have passed laws in different years to make using this technology mandatory in most diesel-fueled vehicles worldwide (The use of DPF for road vehicles goes back to 1985 and, for other non-road cars, several years earlier.)
- The diesel particulate filter consists of a honeycomb ceramic body made from silicon carbide. The ceramic body is divided into many small channels, which are sealed on alternating sides. This results in intake and exhaust channels, which are separated by filter walls. The filter walls are porous and are coated with a substrate comprised of aluminum oxide and cerium oxide. The precious metal platinum, which serves as the catalyst ,is applied onto this substrate.
- The performance of the DPF system is based on the absorption of particulate matter (soot). Particulate matter produced by incomplete fuel- air combustion in the engine can contaminate the air. However, the DPF system prevents this contamination. DPF absorbs and accumulates soot particles, and ECU, if needed, when the volume of deposited soot is high, burns off the soot inside the filter by raising the exhaust temperature.
- However, the potential defect of the DPF system is observable when the vehicle has been in traffic and, thus, the engine runs with low RPM.
SCR principle
What is the AdBlue system
The latent potential energy of diesel is more than gasoline, which has made it one of the most common fuels in vehicles, and diesel engines are one of the most popular engines in the transportation industry .However, like petrol ,diesel produces many polluting emissions, leading to its own environmental concerns. Various technologies have been developed to reduce these emissions, and the selective Catalytic Reduction system (SCR) is one of them. SCR is based on removing or reducing NOxs emissions in the engine following the combustion of fuel and air, which is taken care of by AdBlue or DEEF (Diesel Engine Exhaust Fluid) solution. In fact, SCR is the name of this technology, and AdBlue is the catalyst solution for the reaction. The general components of the SCR system include catalysts, the AdBlue injector, the control system, and AdBlue's measurement/spray system.
For more information and probable problems feel free to contact us:[email protected]
