whatsapp logo
ECU Remapping Course

Diesel ECU Tuning Course with WinOLS – Online Remap Training

Published Updated

Now playing: ECU Programming on the Bench

498$3.7 (135)377 enrolled

Diesel ECU Tuning Course with WinOLS – Online Remap Training

Episodes
39
Time
16:44:52
Price
498$
Other Episodes

1 - What You Will Learn In This Course?

00:01:32

2 - How a Diesel Engine Works Its Parts & Functions

00:21:00

3 - Diesel fuel injection system

00:19:49

4 - Common Rail Direct Injection

00:09:59

5 - Sensors /Actuators/ Control unit

00:37:46

6 - DPF/EGR/SCR system

00:33:13

7 - What is ECU remapping & ECU cloning

00:13:23

8 - ECU tuning tools & tuning software

00:20:46

9 - the types of programmers

00:24:53

10 - How to Read and Write ECU & Reflash

00:22:29

11 - ECU Programming on the Bench

00:21:33

12 - Types of tuning software

00:18:38

13 - WinOLS software

00:20:39

14 - Torque Calculation-Torque Monitoring

00:08:35

15 - torque category ( torque request, cranking, limiter)

00:25:50

16 - Fuel Control Strategies

00:10:28

17 - Start / Phase of Injection

00:13:58

18 - Fuel quantity

00:08:39

19 - injection duration/time

00:07:43

20 - smoke limitation

00:19:46

21 - injection/rail pressure

00:07:49

22 - turbo system

00:27:31

23 - Variable Valve Timing System (VVT)

00:06:52

24 - How to modify tables

00:07:38

25 - How to find table of DELPHI CRD? (part-1)

01:21:42

26 - How to modify table of DELPHI CRD?(part-2)

00:11:07

27 - How to find table of DENSO ECU?(part1)

00:17:40

28 - How to find table of DENSO ECU?(part2)

00:19:30

29 - How to modify table of DENSO ECU?(part3)

00:20:14

30 - How to find table of Siemens SID803A ECU?(part1)

00:56:54

31 - How to modify table of Siemens SID803A ECU?(part2)

00:34:05

32 - How to find table of Continental SID209 Ford ranger?(part1)

00:20:45

33 - How to find table of Continental SID209 Ford ranger?(part 2)

00:51:14

34 - How to modify table of Continental SID209 Ford ranger? (part 3)

00:43:47

35 - VW Caddy EDC17 (PART1)

00:29:39

36 - VW Caddy EDC17 (PART2)

01:10:34

37 - BMW 530D EDC16 (Stage 1 tuning guide)

00:29:47

38 - AUDI A4 TDI find table (part1)

00:51:06

39 - AUDI A4 TDI Explanation table (part 2)

00:30:54

40 - AUDI A4 TDI modification table (part 3)

00:26:57
lock icon

Log in to unlock this episode.

Information

ECU Programming on the Bench

ECU Programming on the bench

The steps we introduced earlier are the easiest ways to access the file. However, if the ECU file was not readable via an OBD-II and the file was not found in the Databank, we would need to find other solutions such as opening the ECU securing and using methods such as K-Line, Boot Loader, J-TAG, etc.

Usually, when the ECU is not readable via the OBD port, the software initially tells you the proper protocols, so that you will know whether to open the ECU or even the ECU as well from the vehicle.

To disconnect the ECU, you need to know where it is located. Most of the ECUs are placed under the dashboard or in the engine bay. Some companies tend to place the ECU in weird locations, therefore, if you didn’t know where it is located, you could look it up on the internet. After you found the ECU location, to disconnect the ECU from the vehicle, do the following steps.

  1. Before proceeding, make sure all electric consumers are turned OFF. 
  2. Turn the switch OFF and for safety reasons, place it far from the vehicle. Also
  3. and etc…

We generally have two protocols for reading the ECU “on the workbench” mode:

Programming using:

  1. Direct Connection to Pin Out of the Connector:

In this mode, it is not needed to open the ECU. Follow the guideline, connect the special wiring cables to ECU pins. Then preferably read the flash and EEPROM in Full backup mode. Be sure not to bend the connector pins. After reading the file, fully save it.

  1. Direct connection to the board:

In the second mode, you need to open the ECU and solder the wires using the J-TAG or Boot method.

You will learn how to open ECU case And how to reflash ECU with ktag programmer

For more information and probable problems feel free to contact us:[email protected] 


 

Rate: 3.70 (135)

Enjoyed the content? Add us as a preferred source to see more of it in Search.

Add as a preferred source on Google
Community
Comments: