Diesel ECU Tuning Course with WinOLS – Online Remap Training
Now playing: Start / Phase of Injection
Log in to unlock this episode.
Start / Phase of Injection
Start of injection and delivery
To understand Start of injection, first we should learn the following topics.
- What is Start of injection?
- What is Start of injection table?
- Effect of Start of injection on engine performance and emission
And after that we will analyze these tables in the WinOLS.
We talk about Start of injection table in the WinOLS.
The point at which injection of fuel into the combustion chamber starts has a decisive effect on the point at which combustion of the air/fuel mixture starts, and therefore on emission levels ,fuel consumption and combustion noise. Consequently, injection timing plays a major role in optimizing engine performance characteristics.
The point at which injection of fuel starts is the position stated in degrees of crankshaft rotation relative to crankshaft top dead center (TDC) at which the nozzle opens and fuel starts to enter the combustion chamber.
The position of the piston relative to top dead center at that moment (as well as the shape of the intake port), determines the nature of the air flow inside the combustion chamber, and the density and temperature of the air. Accordingly, the degree of mixing of air and fuel is also dependent on start of injection. Thus, start of injection affects emissions such as soot, a product of incomplete combustion, nitrogen oxides (NOX), unburned hydrocarbons (HC) and carbon monoxide (CO).
The start of injection requirements differs according to engine load (Figure 1). This fact demands load-dependent adjustment of the start of injection. The characteristic operating data of each engine is thus determined and stored electronically in the form of an engine data map. The engine data map plots the required start of injection points against engine load, speed and temperature. It also takes account of fuel-consumption considerations, pollutant-emission requirements and noise levels at any given power output.
For more information and probable problems feel free to contact us:[email protected]
