Diesel ECU Tuning Course with WinOLS – Online Remap Training
Now playing: Torque Calculation-Torque Monitoring
Log in to unlock this episode.
Torque Calculation-Torque Monitoring
Torque Calculation Strategy
In this section, we will deal with the latest strategy adopted by manufacturers to control performance and especially the carburetion in a Diesel engine, in order to restrict polluting emissions as low as possible: the strategy based on the Calculation of Torque.
We will take a look at why it was necessary to use the torque calculation system and how the chain of elements used is structured:
- Request of external origin.
- How the request is used by the "internal torque request".
- How the ECU communicates with the various control units that manage the powers of the accessories present on the vehicle.
- How the torque is managed through the TCU (Transmission Control Unit) as a function of the maximum possible torque for the gearbox.
- The calculations performed by the ECU for torque losses due to friction.
- How all the calculated torque is generated through the actuators present in the motor system.
Torque base ecu :
Nowadays, torque-based engine management is used as a standard in engine management systems. Then, it is better that understand it entirely and in simple words.
Suppose we want to describe the concept of torque-based ECU in the most straightforward possible manner. In that case, we can say that the software architecture of this ECU is defined as a mathematical model based on the engine rpm and the amount of intake air to the engine in ECU. Most of the systems are with electrical throttle. When a driver pushes the accelerator pedal, it determines not only a request for position of throttle but as a request for torque, and ECU has this possibility to manage the amount of torques demand when the driver pushes the pedal.
Torque Monitoring
we will make a detailed analysis of the strategy adopted by the manufacturers to monitor that the engine torque calculated internally is consistent with that required, and that it does not drift over time, based on various conditions imposed by the manufacturer within the engine control unit.
This function, initially conceived as an additional check to the simple torque calculation in order to verify the development of the engine torque after an update performed by the manufacturer, allowing detection of whether the generated torque is consistent with the expected one or not, or that it always complies with the performance required by the manufacturer, with a certain degree of tolerance for increased wear of the engine.
For more information and probable problems feel free to contact us:[email protected]
